漢高漢高樂泰樂泰 Ablestik 84-1 LMI SR
技術服務熱線：021-51693135 / 021-22818476
ABLESTIK 84-1LMISR4-S25 electrically conductive die attach adhesive has been formulated for use in high throughput, automated die attach equipment. This material is a version of ABLEBOND 84-1LMISR4 that contains 25 μm silver spacers for bondline control.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Thixotropic Index (0.5/5 rpm) 5.6
Viscosity, Brookfield , 25 °C, mPa•s (cP) 9,500
Fineness, Hegemann, μm, Max 45
Density, g/cm3 3.8
Work Life, hours 18
Storage Life @ -40°C (from date of manufacture), year 1
Flash Point - See MSDS
TYPICAL CURING PERFORMANCE
Cure Schedule
1hour @ 175°C
The above cure profiles are guideline recommendations. Cure conditions (time and temperature) may vary based on customers' experience and their application requirements, as well as customer curing equipment, oven loading and actual oven temperatures.
TYPICAL PROPERTIES OF CURED MATERIAL
Physical Properties:
Glass Transition Temperature, Tan δ, °C 140
Young's modulus:
@ 25°C N/mm2 3,000
(psi) (435,113)
Electrical Properties:
Volume Resistivity, ohm-cm 5×10
TYPICAL PERFORMANCE OF CURED MATERIAL
Shear Strength:
Tensile Lap Shear Strength N/mm2 8
(psi) (1,160)
84-1lmisr4-s25 ABLESTIK導電貼片膠已用于高吞吐量的制定，自動貼片設備。這種材料是一個版本的84-1lmisr4 Ablebond包含25μM銀間隔的膠層控制。
固化材料的典型性能
觸變指數（0.5/5轉）5.6
粘度，Brookfield，25°C，MPA的•（CP）9500
細度、Hegemann、μm，馬克斯45
密度，克/厘米3.83
工作壽命，小時18
貯存壽命@ 40°C（自制造之日起），第1年
閃光點看到MSDS
典型的固化性能
治療計劃
1hour @ 175°C
上述固化型材指南建議。固化條件（時間和溫度）可能會根據客戶的經驗和他們的應用要求，以及客戶固化設備，烘箱負荷和實際烤箱溫度變化。
固化材料的典型性能
物理性質：
玻璃化轉變溫度，譚δ，°C 140
楊氏模量：
“25°C N / mm23000
（PSI）（435113）
電氣性能：
體積電阻率，歐姆厘米5×10
固化材料的典型性能
抗剪強度：
拉伸剪切 |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知?jiǎng)h除。