ECCOBOND G757電子組裝/工業膠水/電子組裝膠水/工業用膠
技術服務熱線：021-51693135 / 021-22818476
Product Description: ECCOBOND G757 is a single component, thyrotrophic good flexible heat curing epoxy glue.
-40 ° C to 160 ° C, ECCOBOND G757 presents good flexibility, heat curing, suitable for high-speed production line, can be a good glue glass, steel, copper, aluminum and ERP. Features: easy to use, Absorption stress performance, with a variety of substrate bonding good. Curing process: curing temperature and time to ECCOBOND G757 curing.
Curing will produce a lot of heat, the adhesive layer is less than 0.125 inches (3.2mm), will not produce adverse exothermic reaction. To achieve optimum cure performance, initial curing is initiated and then cured for 2 to 4 hours at the desired maximum operating temperature. The curing time and the curing temperature can also be changed.
Application ECCOBOND G757 is designed for connection of automotive headlamp lenses and mirrors. Storage and handling: ECCOBOND G757 is valid for 6 months at 0 ° C. Stored in original, sealed containers.
Placed in a cool, clean, dry place.
The validity period will vary depending on the application method and storage conditions. Health and safety: ECCOBOND G757 with most of the same industrial raw materials, will be due to contact and stimulate the skin and eyes, so that the body feel uncomfortable.
In high temperature conditions, this product may produce irritation to the breath of the respiratory system.
In the handling, should take good industrial hygiene and safety measures. Pay attention to eye protection and wear chemical clothing to reduce direct contact.
產品介紹：ECCOBOND G757是一種單組分，觸變性好的柔性熱固化環氧膠。
-40°C到160°C時，ECCOBOND G757呈現良好的柔性，熱固化，適于高速生產線，可以很好的膠接玻璃，鋼鐵，銅，鋁及ERP.特征:使用簡單，優良的降低和吸收應力性能，與各種基板膠接良好。固化過程：固化溫度和時間對ECCOBOND G757進行固化。
固化時會產生大量的熱，在膠層小于0.125英寸（3.2mm）時，不會產生不利的放熱反應。為達到*佳固化性能，先進行初始固化，然后在期望*高使用溫度下后固化2到4小時。
固化時間與固化溫度也可改變。
|
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯系信息
