HYSOL KL-G500HT電子膠水/塑封膠水/漢高樂泰膠水/塑封方案
技術服務熱線：021-51693135 / 021-22818476
樂泰 HYSOL KL-G 500HT has been formulated to provide thebest possible moldability and as wide a molding latitude as possible.
Although molding and curing conditions willvary from situation tosituation, recommended starting ranges are shown above.TYPICAL PROPERTIES OF CURED MATERIALAll measurements taken at 25 °C unless otherwise noted.
All physical,electrical and analytical measurements taken on specimens curedfor 2 minutes @ 175 °C with post cure of 6 hours at 175 °C, unlessother wise specified.
Physical Properties:Coefficient of Thermal Expansion , ppm/°C:Below Tg 20Above Tg 60Glass Transition Temperature, °C 175Specific Gravity 2.2Molded shrinkage, as molded, % 0.24
Flexural ModulusKgf/mm2:@ 25 °C 1,400Flexural StrengthKgf/mm2:@ 25 °C 12Thermal Conductivity , W/(m-K) 1.92Water Extract Data, 90 minutes water boil:Conductivity, μmhos/cm 46pH of extract 7Extractable Ionic Content, ppm:Chloride (Cl-) 4Sodium (Na+) 15GENERAL INFORMATIONFor safe handling information on this product, consult the
Material Safety Data Sheet, (MSDS).
This product is not recommended for use in pure oxygenand/or oxygen rich systems and should not be selected asa sealant for chlorine or other strong oxidizing materials.Not for product specificationsThe technical data contained herein are intended as referenceonly. Please contact your local quality department for asistance and recommendations on specifications for thisproduct.StorageStore product in the unopened container in a dry location.Storage information may be indicated on the product containerlabeling.Powder Storage - Powder or preforms should be stored at 5oC orbelow, in closed containers. After removal from coldstorage, the material MUST be allowed to come to roomtemperature, in the sealed container, to avoid moisture
contamination. The suggested waiting time for a standard 15kg carton box is 24 hours.
樂泰 HYSOL KL-G 500HT已經配制成可提供*可能的成型性和盡可能寬的成型緯度。
雖然成型和固化條件可以從情況考慮，推薦的起始范圍如上所示。
固化材料的特性所有測量在25 |
 |
|
手機站
您當前位置是：產品大全 >> 化工 >>
膠粘劑
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發(fā)布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。
10
聯系信息
