HYSOL KL-2500-1K電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-2500-1K電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-2500-1K電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-2500-1K電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-2500-1K電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-2500-1K電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-2500-1K電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-2500-1K電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-2500-1K電子膠水/塑封膠水/漢高樂泰膠水/塑封方案HYSOL KL-2500-1K電子膠水/塑封膠水/漢高樂泰膠水/塑封方案
技術服務熱線：021-51693135 / 021-22818476
樂泰 HYSOL KL 2500-1kepoxy molding compounddelivers outstanding performance and ease of use.
樂泰 HYSOL KL 2500-1kmeets UL 94 V-0 Flammability at3.175mm thickness.TYPICAL PROPERTIES OF UNCURED MATERIALGel Time @ 175 °C, seconds 22
Spiral Flow, @ 175°C, cm 90Shelf Life:@ 5oC, days 365TYPICAL PROCESS DATAHandling
Preheat Temperature :Conventional mold, °C 80 to 100Automold, seconds 0 to 5Molding Temperature, °C 150 to 195Molding Pressure, Kg/cm2 40 to 100Transfer Time:
Conventional mold, seconds 10 to 20Automold, seconds 4 to 15Curing Time, @ 175oC:
Conventional mold, seconds 50 to 100Automold, seconds 50 to 90Post Cure @ 175°C, hours 4 to 6樂泰 HYSOL KL 2500-1khas been formulated to provide the bestpossible moldability and as wide a molding latitude as possible.Although molding and curing conditions will vary from situation tosituation, recommended starting ranges are shown above.StorageStore product in the unopened container in a dry location.Storage information may be indicated on the product containerlabeling.Powder Storage - Powder or preforms should be stored at 5oCor below, in closed containers. After removal from cold
storage, the material MUST be allowed to come to roomtemperature, in the sealed container, to avoid moisturecontamination. The suggested waiting time for a standard 15 kg carton box is 24 hours.
樂泰 HYSOL KL 2500-1kepoxy模塑復合材料具有出色的性能和易用性.
樂泰 HYSOL KL 2500-1kmeets UL 94 V-0可燃性在3.175mm厚度。固化材料的特性特性時間@ 175°C秒秒22螺旋流，@ 175°C，cm 90Shelf壽命：@5oC， |
免責聲明：以上所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，www.qy6.com對此不承擔任何責任。如有侵犯您的權益，請來信通知刪除。